Theses/Dissertations from 2018
Permeswaran, Palani Taver (2018), Validation of computational methods for fracture assessment of metastatic disease to the proximal femur
Tessmann, Jonathon (2018), Neuroendocrine genomics for tumor variant discovery
Thompson, Jessica Rae (2018), 2D and 3D control of photopolymerized polycaprolactone scaffolds for cell replacement therapy in retinal disease
VanDenBosch, Leah M. (2018), Investigating the effect of fluid shear stress on the failure of cancer cell membranes: an experimental and computational analysis
Theses/Dissertations from 2017
Adam, Ryan J. (2017), Radiographic assessment of lung anatomy, physiology, and disease in a porcine model of cystic fibrosis and people with cystic fibrosis
Brown, Alex Joseph (2017), Maintenance and modification of mesenchymal stromal cell immunosuppressive phenotype
Chung, Timothy Kwang-Joon (2017), Study of multi-axial failure properties of planar biological soft tissues
Ellis, David G. (2017), Machine learning improves automated cortical surface reconstruction in human MRI studies
Gao, Long (2017), Network-based approaches to studying healthy and disease development
Hammond, Emily Marie (2017), Longitudinal medical imaging approaches for characterization of porcine cancer models
Heckelsmiller, David James (2017), Multimodal evaluation of local and whole-joint cartilage changes in an in vivo animal model
Kalantari, John I. (2017), A general purpose artificial intelligence framework for the analysis of complex biological systems
Kim, YuJaung (2017), Mechanisms and prevention of SUDEP in Dravet Syndrome
Michael, John Stuart (2017), Characterizing occupational instabilities induced by a four-DOF all-terrain vehicle simulator
Ong, Chun Hoe (2017), Electrostatic precipitator to collect large quantities of particulate matter
Permeswaran, Vijay Niels (2017), Development of a computational model to study instability and scapular notching in reverse shoulder arthroplasty
Simoens, Kevin James (2017), Anthropometric shape parameters in obese subjects: implications for obese total joint arthroplasty patients
Song, Ino (2017), The effect of variations in the strength and type of spinal muscles on the stabilization of the lumbar spine via follower compressive load mechanism
Stoner, Kirsten Elizabeth (2017), Surgical treatment for cervical myelopathy: the effect on spinal cord strain using magnetic resonance imaging and finite element modeling
Thomas, Holly Dominique (2017), A computational investigation of patient factors contributing to contact stress abnormalities in the dysplastic hip joint
Tollefson, Mallory RaNae (2017), Accelerated many-body protein side-chain repacking using gpus: application to proteins implicated in hearing loss
Wadkins, David Allen (2017), Nanoparticles: nanoscale systems for medical applications
Wagner, Andrew P. (2017), Vibratory stimulation of thyroid epithelial mimics hormonal stimulation
Zarei, Kasra (2017), Objective quantification of sensory function using a battery of smartphone applications
Zarkoob, Hoda (2017), Mechanobiology of keratinocyte aggregate formation and its role in wound healing
Theses/Dissertations from 2016
Aghvami, Maziar (2016), Fiber network and nonlinear models of cell matrix interactions and mechanosensing on fibrous gels
Avdic, Armin (2016), Global optimization using metadynamics and a polarizable force field: application to protein loops
Berkowitz, Benjamin Micah (2016), Development of metrics to describe cerebral aneurysm morphology
Bingenheimer, Heidi Kirsten Johanna (2016), Analysis of hindfoot alignment for total ankle arthroplasties
Bodduluri, Sandeep (2016), CT image registration-based lung mechanics In COPD
De Jesús, Aribet M. (2016), Effects of mechanical stimulation on fibroblast-guided microstructural and compositional remodeling
Dilger, Samantha Kirsten Nowik (2016), Pushing the boundaries: feature extraction from the lung improves pulmonary nodule classification
Dougherty, Timothy M. (2016), Quantitative computed tomography based measures of vascular dysfunction for identifying COPD phenotypes and subphenotypes
Forbes, Jessica LeeAnn (2016), Development and verification of medical image analysis tools within the 3D slicer environment
Hallier, Andrea Rae (2016), Variant-curation and database instantiation (Variant-CADI): an integrated software system for the automation of collection, annotation and management of variations in clinical genetic testing
Ibrahim, Moustafa Galal (2016), An automated method of generating NURBS meshes for patient-specific geometries
Iyer, Krishna S. (2016), Dual energy CT based approach to assessing early pulmonary vascular dysfunction in smoking-associated inflammatory lung disease
Kizhakke Puliyakote, Abhilash Srikumar (2016), Comprehensive assessment and characterization of pulmonary acinar morphometry using multi-resolution micro x-ray computed tomography
Krog, Benjamin Lee (2016), Mechanisms of resistance to fluid shear stress in malignant cells
Long, Steven A. (2016), Developing and implementing a computer vision based surgical simulator for hip wire navigation
Metzger, Andrew (2016), An automated tissue classification pipeline for magnetic resonance images of infant brains using age-specific atlases and level set segmentation
Rink, Colleen Elizabeth Quilang (2016), Measuring hip fracture fixation guide wire placement for performance assessment in simulation and the operating room
Shrestha, Liza (2016), Building user interactive capabilities for image-based modeling of patient-specific biological flows in single platform
Taylor, Leah Kristine (2016), Objective measures of operating room wire navigation performance
Zasadny, Frederick Martin (2016), Lysosomal reacidification by degradation of poly(dl-lactide-CO-glycolide) nanoparticles in a lipotoxic cardiomyopathy model
Zhou, Cheng (2016), Enhanced phagocytic capacity endows chondrogenic progenitor cells with a novel scavenger function within injured cartilage
Theses/Dissertations from 2015
Bataineh, Mohammad Hindi (2015), New neural network for real-time human dynamic motion prediction
Brouillette, Marc James (2015), Mechanical stimulation of cartilage induces mitochondrial reactive oxygen species production mediating metabolic responses
Chen, Jiawen (2015), The development of a DICOM import software and Modality Calculators for Radiology Protocols
Choe, Hyeong Hun (2015), Feasibility of intra-articular adeno-associated virus-mediated proteoglycan-4 gene therapy to prevent osteoarthritis
Christopher, Mark Allen (2015), Computational methods to model disease and genetic effects on optic nerve head structure
Dibbern, Kevin Nathaniel (2015), An objective CT-based method for quantifying articular fracture severity : clinical application in multiple joints
Frick, Eric Christopher (2015), Mitigation of magnetic interference and compensation of bias drift in inertial sensors
Goddard, Aaron Matthew (2015), Applying vessel inlet/outlet conditions to patient-specific models embedded in Cartesian grids
Grant, Ryan James (2015), Community based air quality monitoring near proppant sand facilities
Jang, Kee Woong (2015), Biophysical effects of ultrasound therapy for cartilage regeneration and microbubble mediated shock waves and drug release control for cancer treatment
Jones, Samuel M. (2015), Evaluation of a low-cost aerosol sensor to assess occupational exposures
Judisch, Alexandra Lynae (2015), Towards an optimized low radiation dose quantitative computed tomography protocol for pulmonary airway assessment
Manzar, Gohar Shahwar (2015), Generation and function of glucose-responsive insulin producing cells derived from human induced pluripotent stem cells
Owusu, Nana (2015), Characterization of T1rho sensitivity to metabolite and temperature changes
Park, Jooyeon (2015), Computational prediction of organic crystal thermodynamics using molecular dynamics
Patwardhan, Kaustubh Anil (2015), Optimization-based dynamic simulation of human jogging motion
Sweeney, Sean (2015), Multimodal nanoparticles for image-guided delivery of mesenchymal stem cells in the treatment of myocardial infarction
Townsend, Kevin Charles (2015), Validation and applications of discrete element analysis in the hip joint
Wang, Tianjiao (2015), Feasibility for spinal muscles creating pure axial compressive load or follower load in the lumbar spine in 3-D postures
Theses/Dissertations from 2014
Ai, Leo (2014), Examining the feasibility of magnetic source MRI by studying fMRI acquisition and analysis strategies
Chivukula, Venkat Keshav (2014), Development of a NURBS-based particulate dynamics framework for modeling circulating cells
Dellsperger, David John (2014), Outcome prediction in head and neck cancer patients using machine learning methods
Ephraim, Sean Stephen (2014), Design and application of methods for curating genetic variation databases
Gade, Piyusha Sanjay (2014), Development of a surgical simulation toolkit for mitral valve repair surgeries
Hansen, Jessica Kay (2014), Interaction of blood cells with the vessel wall in thrombosis
Kruger, Karen Marie (2014), Computational and experimental biomechanics of total hip wear increase due to femoral head damage
Looft, John Maurice (2014), Adaptation and validation of an analytical localized muscle fatigue model for workplace tasks
Matsui, Joy Tamiko (2014), Development of image processing tools and procedures for analyzing multi-site longitudinal diffusion-weighted imaging studies
Permeswaran, Vijay Niels (2014), Understanding mechanical trade-offs in changing centers of rotation for reverse shoulder arthroplasty design
Rotti, Pavana Gururaj (2014), 3D differentiation enhances the efficiency of differentiation of human induced pluripotent stem cells to insulin producing cells
Stockman, Tyler Joseph (2014), Early targeting of knee osteoarthritis : validation of computational methods
Waheed, Saphia Fatima (2014), The effect of arch insoles on tibial rotation and tibiofemoral contact stress
Yang, Huijing (2014), Investigation of the correlation between cerebral blood flow and bold
Theses/Dissertations from 2013
Chapman, Ryan Michael (2013), The effect of transcranial direct current stimulation on the behavioral and neurophysiological performance of healthy subjects during reaching
Chung, Timothy Kwang-Joon (2013), Heterogeneous Finite Element Stress Analysis of Abdominal Aortic Aneurysms : Comparison Between Ruptured and Unruptured Lesions
Criswell, Amy Jo (2013), Development of a lumbar facet joint replacement
De Hoedt, Amanda Marie (2013), Clubfoot Image Classification
DeLuca, Adam Peter (2013), Computational methods for efficient exome sequencing-based genetic testing
Deng, Wenxiang (2013), Cuda K-Nn: application to the segmentation of the retinal vasculature within SD-OCT volumes of mice
DeShaw, Jonathan (2013), New methodologies for evaluating human biodynamic response and discomfort during seated whole-body vibration considering multiple postures
Dilger, Samantha Kirsten Nowik (2013), The use of surrounding lung parenchyma for the automated classification of pulmonary nodules
Du, Kaifang (2013), Regional pulmonary function analysis using image registration and 4DCT
Elkins, Jacob Matthias (2013), Biomechanics of failure modalities in total hip arthroplasty
Govindarajan, Vijay (2013), Three dimensional fluid structural interaction of tissue valves
Heo, Hye Young (2013), Detecting activity-evoked pH changes in human brain
Hosnieh Farahani, Mehrdad (2013), Modeling of the human larynx with application to the influence of false vocal folds on the glottal flow
Jermihov, Paul Nicholas (2013), Biomechanical implications of congenitally bicuspid aortic valves: a finite element analysis of patient-specific geometry
Kim, Eun Young (2013), Machine-learning based automated segmentation tool development for large-scale multicenter MRI data analysis
Kim, Yang Wook (2013), Incorporating sheet-likeness information in intensity-based lung CT image registration
Lingala, Sajan Goud (2013), Novel adaptive reconstruction schemes for accelerated myocardial perfusion magnetic resonance imaging
Mobberley, Sean David (2013), Quantitative assessment of scatter correction techniques incorporated in next generation dual-source computed tomography
Ohrt, Gary Thomas (2013), Surgical simulation training models for orthopaedic fracture surgery
Paliwal, Monica (2013), Development of a novel balance assessment tool and its validation in the study of patients with symptomatic spinal deformity
Zhou, Cheng (2013), Discriminating Chondrogenic Progenitor Cells (CPCs) as a Distinct Cell Type, Apart from Normal Chondrocytes